Use in the field
161
Working method on the
headland
The driving pattern that you use, in other words how you must stop
and turn on the headland, depends on your border spreading method.
•
spreading the border from the sprayer tramline with TrimFlow and
one-sided boundary spreading with additional room (situation A),
or
•
border spreading by closing off one disc and using a border
spreading plate (situation B).
Do the following when spreading on the headland:
For boundary track spreading from the sprayer tramline
(situation A)
Stop spreading by closing the dosing units of the machine when
you are half a working width from the end of the land.
Let the spreading discs turn and do not switch off the PTO shaft.
Open the dosing units again at one and a half times the working
width from the field edge after turning around.
Spread finally the field edges with TrimFlow or the border
spreading plate.
Make an additional way along the field edge when spreading the
borders with the border spreading plate (situation A).
See section »Border spreading« on page 165.
Closing dosing units
Opening dosing units
Border spreading
Border spreading
Summary of Contents for RO-M EW
Page 42: ...Getting familiar with the machine 42 Menu structure...
Page 43: ...Getting familiar with the machine 43...
Page 218: ...Notes 218 Notes...
Page 219: ...Notes 219...
