Safety
20
Electric control system
Disconnect the control box
Disconnect the control box from the electric system as soon as no
further functions are needed in order to prevent unintentional
operation. A connected control box may result in dangerous situations
and may cause bodily injury and/or damage the machine.
Battery cables must be disconnected/connected correctly
Always disconnect the battery cable (negative pole) from the electric
system when working on the machine. Connect the battery cables
correctly: the positive pole first and then the negative pole. Always
equip the positive pole with the appropriate protective cap to avoid a
short circuit as. this could lead to damage the tractor and machine.
Use
Only use after training
The machine may not be operated before the user has been properly
instructed for commissioning it by the dealer or an authorised
representative of the manufacturer.
Ensure that you are familiar with all systems and control elements and
their functions prior to working with them! It is too late to familiarise
oneself with the machine while working! Careless usage could lead to
injury and/or damage the machine.
To be used and operated by 1 person
The machine may only be operated by one person, from the tractor.
Operating the machine from the tractor will keep you out of harm's
way.
Other people should not be in the direct vicinity of the machine and the
tractor. Those who are within the working area and the danger zone
could be injured.
Check the immediate surroundings
Check the immediate surroundings and keep a constant eye on them
when starting and while operating with and at the machine. Familiarise
yourself with the immediate surroundings. Do not start working until all
people and obstacles within the working area and danger zone of the
tractor and machine have been removed.
Never stay or allow anyone to stay within the danger area while the
machine is running! If there are people within the working area and the
danger zone it could lead to injury.
Do not stand on the machine
Being on the machine during activities and transport is prohibited. You
may only be on the parts of the machine intended for the purpose if it
is standing still and prevented from rolling. Being on the machine
when in any other state could lead to serious injury.
Keep the protection intact
The protection of the machine, e.g. shields and guards, prevents
access to danger areas! Therefore all protection must be kept in
optimal condition and moved into the right position prior to starting to
work! The absence of protective gear could lead to injury.
Summary of Contents for RO-M EW
Page 42: ...Getting familiar with the machine 42 Menu structure...
Page 43: ...Getting familiar with the machine 43...
Page 218: ...Notes 218 Notes...
Page 219: ...Notes 219...
