Use in the field
157
Stop when the ground covered since the previous marker is the
same as the set working width.
Engage the parking brake of the tractor.
Place a marker near the identification point.
Proceed until the ground covered since the previous marker is the
same as the set working width.
The counter for ground covered begins counting automatically from
0.0 m again. To restart the counter, you do not have to go to the field
‘Start’ first.
The ‘Start’ field’ is changed in the field ‘Stop’.
Press the OK key until you have reached the end of the headland.
In the headland on the other side of the site, set the tramlines out
in the same way. If necessary, extra markers can also be placed
halfway across the site.
Tramline patterns
Your preferred border spreading method determines the tramline
pattern.
Select on the basis of the site width, the presence of the sprayer
tramline and the spreader's equipment.
Tramlines when using the
TrimFlow
Drive half the working width from the field edge (1/2 X metres) when
doing boundary track spreading with TrimFlow (optional extra).
Set the first way at half the working width (1/2 X metre) from the
field edge (in the first sprayer tramline).
The following courses are clearly defined at the full working width.
See section »Boundary track spreading with the TrimFlow« on
page 168.
Summary of Contents for RO-M EW
Page 42: ...Getting familiar with the machine 42 Menu structure...
Page 43: ...Getting familiar with the machine 43...
Page 218: ...Notes 218 Notes...
Page 219: ...Notes 219...
