Before first use
66
Put the machine on a supporting beam before moving in between
the tractor and machine
This will ensure that the machine cannot drop if the power lift should
inadvertently be operated while you are between the tractor and
machine. Switch the tractor motor off. Without the support, a power lift
that drops could wedge you in, resulting in possible serious physical
injury.
The maximum operating angle of the coupling shaft is 30
°
when lifted
and 30
°
when lowered.This is the maximum length between the PTO
shaft and the machine drive axle.
Place the machine on a supporting beam with the power lift at the
highest position.
Switch the tractor off and remove the keys from the ignition.
Engage the parking brake of the tractor.
Now check whether the furthest working angle is less than 30
°
.
Check that the overlap of the profiled tubes is still at least 150 mm.
Detach the tractor section.
Apply grease to the profiled tubes.
Attach the protection sleeves.
Slide the coupling shaft halves into each other.
Mount the coupling shaft on the machine.
max.30
o
max.30
o
max.30
o
max.30
o
Summary of Contents for RO-M EW
Page 42: ...Getting familiar with the machine 42 Menu structure...
Page 43: ...Getting familiar with the machine 43...
Page 218: ...Notes 218 Notes...
Page 219: ...Notes 219...
