Activities before spreading
143
Review and adaptation
The maximum permissible loss in the ditch is established in the
environmental standards (EN 13739-1). In order to comply with the
standards the quantity of fertiliser in the 1st trough, standing in the
notional ditch, must be a maximum of 10% of the quantity collected in
the trough in the middle of the track (= 100%).
The trough on the land next to the notional ditch provides an insight
into the topping. It will never be 100%.
Test the full field spreading pattern next as described in the
following section.
A
Good spreading pattern, the border spreading plate has
been adjusted well
B
The border spreading plate is not spreading widely enough.
Set this small part a bit to the right in the direction of Y
(5).
Repeat the test.
C
The border spreading plate is spreading too widely
Set this small part a bit to the left in the direction of X(1).
Repeat the test.
A
Ditch side
B
C
Border spreading plate
X
Y
1
5
Hydraulic border spreading plate
Summary of Contents for RO-M EW
Page 42: ...Getting familiar with the machine 42 Menu structure...
Page 43: ...Getting familiar with the machine 43...
Page 218: ...Notes 218 Notes...
Page 219: ...Notes 219...
