System settings
85
Adapting auto-calibration to
field size
Perform auto-calibration more often on smaller parcels
If you predominantly spread over larger parcels, the factory setting of
auto-calibration is sufficient. If once per minute or 75 kg is not suffi-
cient, choose the medium-sized or small parcel setting.
Press the current option field for field size:
•
Large parcel
•
Mid-sized parcel
•
Small parcel
Press on the checkbox of your choice.
Gored spreading is not/is
possible
Spreading subsequently in case of parcel boundaries which are
not right-angled
Sometimes you cannot spread across the full working width during
passes. A spreader with the option of adjusting the working width au-
tomatically via a GPS can perform gored spreading. You can then
spread without compromising on the quality of the spreading.
This option is already available in your operating software. Not every
spreader is suitable for this.
T
IP
If the spreader is equipped with the GEOspread system, it is checked
as factory setting.
N
OTE
Use this function only if your spreader is suitable for it.
With
•
GEOspread dosing,
•
activated GEOspread and GEOcontrol license,
•
GPS signal.
Press the option field gored spreading on/off.
I
NDICATION
Switch the TC functions on as well.
See section »Set ISOBUS communication« on page 88.
S
Choice of parcel size with auto-calibra-
S
Gored spreading Yes/No
Summary of Contents for RO-M EW
Page 42: ...Getting familiar with the machine 42 Menu structure...
Page 43: ...Getting familiar with the machine 43...
Page 218: ...Notes 218 Notes...
Page 219: ...Notes 219...
