Vicon RO-M EW User Manual Download Page 34

Page: 34 / 225

Getting familiar with the machine

•

Extra functions:

•

Calculator

•

Internet browser

•

Camera screen (Camera is optional)

•

Status bar for time, GPS signal strength and driving direction

•

Save and read:

•

Documents

•

Tractor data

•

Field particulars

•

Work particulars of various ISO machines.

•

Client particulars.

With the main switch on the upper left in the red extension, you can
switch the control box on and off.



Always switch off the control box when you leave the tractor.

If the box is engaged, unintended functions can be activated while you
are in the danger area. Moreover, the control box uses power, as a
result of which the tractor battery could be flattened.

After starting up, the screen with the last (two) selected applications
appears.

Summary of Contents for RO-M EW


































































































































































































































Search results

Summary of Contents for RO-M EW

Reviews:

Related manuals for RO-M EW

Brands by name

Popular brands

Vicon RO-M EW, User Manual

Search results

Summary of Contents for RO-M EW

Reviews:

Related manuals for RO-M EW

Brands by name

Popular brands