System settings
75
System settings
For a correct control system operation, it is necessary to set and
calibre the spreader before first use or after an alteration to the
machine, for example after fitting extra accessories. Moreover, you
can enter a number of system settings to increase your ease of use.
The method of working and display when using the IsoMatch or Tellus
control box (accessory) is described in this user manual.
Differences in operation
If your tractor has an ISOBUS communication system with an
independent terminal which you use to operate the spreader, the
version of the screens and key functions may deviate slightly. The
procedure to enter values or changing settings can be different.
Differences in screen layout and interchangeable keys
The Focus II and the ISO-tractor terminal may have 5 or 6 buttons left
or right of the screen.In that case, you switch between the function
keys with a switch key. The operation of this terminal is described in
the user's manual of the tractor or control box.
Differences in operation of fixed buttons (Tellus, Focus II),
touchscreen and popup numeric keyboard (IsoMatch)
Keys of the Tellus control box are assumed in the description. The
IsoMatch uses a touchscreen to execute all settings. If you touch a
value on the screen in order to change it, a numeric keyboard appears
to execute it immediately.
Certain functions, such as date, time, communication with an external
system, etc., must be set in the operating system of the control box.
Refer to the user's manual of the tractor or the control box.
Entering system
settings
The system settings are needed for the good operation of the control
system. Moreover, this enables you to enter your user preferences, for
example, for alarm signals.
Link the machine up as described in
chapter »Connecting to the tractor« from page 68.
Check that the machine is clean and all accessories are fitted.
Position the spreader horizontally and vertically, by means of the
top link and the lift rod adjustment.
Start the tractor and drive to a place with a firm, horizontal base.
Engage the parking brake of the tractor, but do not switch off the
engine.
Switch the control box on.
The main screen of the spreader will appear on the control box after a
few seconds.
Keyboard popup
Main screen with IsoMatch keyboard
Summary of Contents for RO-M EW
Page 42: ...Getting familiar with the machine 42 Menu structure...
Page 43: ...Getting familiar with the machine 43...
Page 218: ...Notes 218 Notes...
Page 219: ...Notes 219...
