Maintenance
181
Maintenance
Repair damage safely and without delay
Repair the machine safely before you continue with work:
•
place the tractor and machine on a firm, straight surface,
•
switching off the PTO shaft,
•
releasing the pressure from the hydraulic system,
•
switching off the electronic control system,
•
switching the tractor off and removing the key from the ignition,
•
engaging the parking brake of the tractor,
•
disconnect the tractor if possible,
•
wait until all parts have stopped moving. The mass (inertia) could
keep the machine running for a bit!
•
place wheel chocks in front of the wheels of a machine with parking
wheels to prevent it from rolling away,
•
wearing protective clothing, such as safety gloves and shoes,
•
carefully follow the instructions given,
•
use the correct tools,
•
bigger or heavier parts must be locked and secured to lifting gear
when being replaced,
•
parts that could move unintentionally must be supported and
secured,
•
do not climb on parts of the machine that are not in use. Only use
stepladders, ladders or other tools intended for this purpose.
•
disconnect the feed while working on the electric system.
•
disconnect the cables from the battery and the dynamo before arc
welding on the tractor or the connected machine!
Performed by an authorised person
Always have an authorised expert perform maintenance and repairs
as prescribed in
section »Authorisation« on page 11.
All forms of responsibility of the manufacturer become null and void
and the guarantee lapses if maintenance and repair work are
performed by an unauthorised person.
Summary of Contents for RO-M EW
Page 42: ...Getting familiar with the machine 42 Menu structure...
Page 43: ...Getting familiar with the machine 43...
Page 218: ...Notes 218 Notes...
Page 219: ...Notes 219...
