Safety
16
Calculations
The calculations can be made with the values given in the above-
mentioned chart.
Actual total weight
The actual total weight must not exceed the permitted total weight.
The actual total weight (in kg) is calculated as follows:
Actual front axle load
The actual front axle load must not exceed the permitted maximum
load. The actual total front axle load (in kg) is calculated as follows:
Actual rear axle load
The actual rear axle load must not exceed the permitted maximum
load. The actual total rear axle load (in kg) is calculated as follows:
Ballast required in the front
The minimum load on the front axle must be 20% of the basic weight
of the tractor. With a machine mounted in the power lift behind the
tractor, the minimum required ballast (in kg) in front of the tractor is
calculated as follows:
If the calculated value is negative no additional ballast is required.
Actual total weight (kg) = A + D + E
g
Actual front axle load =
D x ( f + g ) + ( B + g ) - E x (h + i )
Actual rear axle load (kg) =
actual total weight (kg) -
actual front axle load (kg)
f + g
Front ballast required (kg) =
E x ( h + i ) - ( B + g ) + (0.2 x A x g )
Summary of Contents for RO-M EW
Page 42: ...Getting familiar with the machine 42 Menu structure...
Page 43: ...Getting familiar with the machine 43...
Page 218: ...Notes 218 Notes...
Page 219: ...Notes 219...
