Vicon RO-M EW User Manual Download Page 74

Page: 74 / 225

Connecting to the tractor

Checking and setting the

machine

Always check the machine after connection and set it horizontal if
required.



Lift the spreader until it is lifted from the ground or ramp.



Switch the tractor and the control box off, remove the key from the
ignition and engage the parking brake of the tractor.



Check the locking system of the catch hooks of the lower links and
the top link.



Make sure that the electric cables and hydraulic hoses do not get
jammed. Lead them or tie them up in order to prevent dangerous
situations. Make sure that there is sufficient space for movement
when lifting or lowering the machine.



Adjust the machine so that it is level with the lift rod adjustment.



Turn the top link until the machine is standing horizontally.



Lock the top link when that is possible.

Summary of Contents for RO-M EW


































































































































































































































Search results

Summary of Contents for RO-M EW

Reviews:

Related manuals for RO-M EW

Brands by name

Popular brands

Vicon RO-M EW, User Manual

Search results

Summary of Contents for RO-M EW

Reviews:

Related manuals for RO-M EW

Brands by name

Popular brands