Vicon RO-M EW, User Manual

Page: 213 / 225

Troubleshooting
213
Machine
makes a noise
while running
Discharge bushing makes contact with
the spreading disc
Please contact your dealer
Put down spreader with filled hopper
Repair the machine. Set the dosing
mechanism and discharge point again 189,
192
Spreading disc bent / out of balance
Check the spreading discs for damage
and that all the vanes are present
108
Encrusted fertiliser at the agitator and/or
spreading discs Remove encrusted fertiliser. Clean the
machine thoroughly after each use.
177
Powerful
vibrations
perceptible
Shut down the PTO shaft immediately! Attend to the problem to prevent damage
Great imbalance in the spreading discs Check the vanes and spreading discs 108
Bent agitator axle or damaged agitator
Replace the agitator axle and/or the
agitator
PTO shaft angle out of working reach
Limit the working angle to a maximum of
30º
65
Alarm on the
control box
screen
The control system cannot perform
requested function correctly Refer to section »Alarms« for the meaning
and advice
95
The external
system is not
communi-
cating with the
control box
RS232 plug does not have the correct
connection on the side of the control box
for the signal from the external system
Check and modify the plug pin occupation
on the side of the control box, see user's
manual for control box and external
system
The control box and external systems are
not communicating with each other in the
same language
Check the control box settings by means
of the external system data, see user's
manual for the control box, tractor, Tellus
and external system.
Application rate control by means of an
external signal is not connected
Switch on the external signal reception 77
External system not switched on or
incorrectly set
Check external system operation
Spreader does
not appear on
the screen
Control box displays another system
Press the switch key to choose the
spreader display
33
Spreader ISO plug not connected Connect the spreader ISO plug 72
Power supply to the spreader and/or
control box interrupted
Check the electrical cables and fuses
Problem Possible cause Solution Pag.