Tiernan TDR7, Manual

Page: 65 / 226

53
Control Front Panel Overview
The Reset function resets the TDR7, reloads all programmable logic
and firmware, and restarts the unit. When you reset the TDR7, the unit
restores the last configuration you set, reverts the run–time clock to
day 0 and time 00:00:00, and erases the fault history log.
NOTE: Before You Reset the TDR7
The TDR7 clears the fault history log whenever you reset the
unit. If you are experiencing problems and decide to reset the
unit, first go to the
History function and write down all faults
contained in the fault history log. You may need to use the list of
faults as a troubleshooting aid.
NOTE...
NOTE: Automatic Clock Resets to 0
The run–time clock resets to 00:00:00, Day 0 whenever you
reset the
TDR7 or turn the power off and then back on. After you
reset the unit or turn the power on, use the clock function to set
the current day and time.
NOTE...