Tiernan TDR7, Manual

Page: 32 / 226

Chapter 2 18
Installing the TDR7
AC Power
Cords
The TDR7 shipping kit includes two AC power cords, which are
described below.
North American Applications
One cord has an IEC–compatible female plug on one end and a North
American male plug on the other. This cord is UL and CSA approved
up to 125
VAC at 10 A . This cord is ready to use with no user wiring
required.
International Applications
The second cord has an IEC–compatible female plug on one end and
three stripped and tinned bare wires on the other end. This cord is for
international applications and is approved up to 250
VAC at 6 A by
many international safety agencies, including VDE. The wire in this
cord complies with the following international color code:
Line: Brown
Neutral: Blue
Ground: Green/Yellow
HAZARD: Install Termination Plug
If your installation requires use of the unterminated power cord,
you must install the appropriate certified termination plug. The
required certifying agencies are listed in the following table.
DANGER!
Electric Shock
Hazard