Tiernan TDR7, Manual

Page: 15 / 226

xv
About the TDR7 Shipping Cartons and Packing Materials
Equipment
Repacking
Instructions
To repack the TDR7 for shipment to another location or to return the
unit to Tiernan for repair, please use the original shipping carton and
packing materials. Before you begin to repack the equipment, perform
the following inspections:
1. Inspect the shipping carton to ensure that it does not have any
holes punched through it and that all four sides are sturdy and are
firmly attached to the adjacent walls, top, and bottom of the
carton.
2. Ensure that both specially designed suspension frames are
available for use in repacking the equipment. The suspension
frames look like a cardboard frame with a sheet of clear plastic
stretched over the opening.
3. Inspect the two suspension frames to ensure that the cardboard
frames are in one sturdy piece, and the plastic is not torn or ripped
apart from the frames.
4. If you believe the carton or packing materials will not properly
protect the equipment during shipping, contact Tiernan
Communications Product Support.
CAUTION: Carefully Follow the Repacking Instructions
If the suspension frames are not packed into the shipping carton
as instructed below, the equipment may be severely damaged
during shipping and handling.
CAUTION!
Please Read
Carefully