Tiernan TDR7, Manual

Page: 101 / 226

89
Remote Control Device Overview
LO Displays the current local oscillator frequency setting.
#
Set the frequency to match your LNB downconverter local
oscillator frequency. The DVB default is 10000
MHz.
LOCK Displays current lock status
Demod Displays the current lock status of the demodulator.
Decoder Displays the current lock status of the decoder.
Transport Displays the current lock status of the transport stream.
OFFSET
Displays a measurement in MHz of the difference between
the actual receive carrier frequency and the frequency
determined by subtracting the
LO Freq parameter from the
RF Freq parameter. To achieve carrier (transport stream)
lock, the difference between the two frequencies, or the
Offset, must be less than 2MHz; however, to achieve
optimum performance, the
Offset should be as close to zero
as possible.
RF Radio Frequency
#
Enter the frequency of the incoming RF signal. Acceptable
frequencies range between 950 and 2050
MHz above or
below your local oscillator frequency. The DVB default is
11210
MHz.
SR Displays the demodulator symbol rate.
QD Command List
(Cont.)
First Level
Mnemonic Second Level
Mnemonic
Effected Function