Edit Menu
DG2030 User Manual
3Ć37
Then, the EXECUTE button is pressed to start input. Front panel keys are then
pressed to set the required data values. The kind of input that is possible differs
according to the display format, as shown in Table 3-8.
Table 3Ć8: Numeric input differences
Display Method
Input Position
Numeric Input
Type
Timing
Display of that group data value is selected.
Hexadecimal
Table
Data at the object position is displayed highlighted
(bright).
Hexadecimal
Binary
Data at the object position is displayed highlighted
(bright).
Binary
Note that depending on how many bits there are in the group at which the input
is currently directed, it is sometimes not possible to input the full range of
hexadecimal digits. For instance, if the group is only three bits wide, it is not
possible to input a digit larger than 7.
Input of each data value finishes, and the data is set, when the number of input
digits is sufficient to set all the bits in the group. There is no need to press the
enter button.
When the scope is only one group deep (or one bit deep for binary format), the
cursor moves along the data by the number of points in a step for each input
operation. The next input operation will then set the data at the new cursor
position for the same group.
However, when the scope is more than one group deep (or more than one bit
deep for binary format), the cursor does not immediately move. Instead, the next
input action will be directed at the next group down (or to the right). Only when
input to the last group in the scope is complete does the cursor move along the
data.
Operation.
Actions for performing numeric input
Bottom button
Popup menu
Side button
Front Panel button
Executed Action
Numeric input
OK
Set the Points/Step using the general purpose knob.
OK
EXECUTE
Input data using numeric keys.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com