Setup Menu
3Ć70
DG2030 User Manual
NOTE
. Note that the settings performed using the Output Channel Assign menu
do not take effect unless the OK button is pressed.
Operation.
Clear output channel assignment
Bottom button
Popup menu
Side button
Output Condition
Assign Condition
Select the channel for which the data assignment is to be cleared using the up and down arrow
buttons.
Release
Sets the control method used to set output channels to the high-impedance state.
Table 3-19 shows the four high-impedance state control methods that can be
selected for each channel.
Sub Menu
Item
Function
Event Level
Setsthe event control input threshold level. Thislevel can be set in the
range -5 to +5 V.
Event
Enablesor disablesthe event control.
Inhibit Level
Setsthe inhibit control input threshold level. Thislevel can be set in the
range -5 V to +5 V.
Change Inhibit
Control
Sets the control method used to set output channels to the highĆimpedĆ
ance state. Table 3Ć19 shows the four highĆimpedance state control
methodsthat can be selected for each channel.
Operation.
Set the event input level
Bottom button
Popup menu
Side button
Output Condition
Control Condition
Event Level
(Set the event level)
Control Condition
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com