Operating Examples
2Ć32
DG2030 User Manual
Before Starting Examples
Be sure that the DG2030 is properly installed. Refer to Installation on page 1-6.
Turn the DG2030 on. Refer to Power On on page 1-9 for details on turning the
DG2030 on.
You do not need to connect the oscilloscope until Example 3.
Operating Procedure Sequences
Each operating procedure is presented in table format in order starting with step
1, and progresses through the end of the procedure. Tables such as the one shown
below list the steps for each procedure task. For these steps, press the buttons in
the order shown in the table, from left to right in each row, from top to bottom of
the table. If a number is shown in the front panel button column, enter that value
using the keypad. For popup menus, use the general purpose knob to select items
from the menu list. Operations such as operation 6 (below) do not involve
pressing the buttons shown in the row above, but rather are descriptions of
operations to be performed. Figure 2-21 shows the buttons used and the menu
layout.
Menu button
Bottom button
Popup menu
Side button
Front Panel
button
Operation 1
Operation 2
Operation 3
Operation 4
Operation 5
Operation 6 (For example, set to xx with general purpose knob.)
Operation 7
Menu Button
Bottom Button
Side Button
Front Panel Button
Side Menu
Bottom Menu
General Purpose Knob
Figure 2Ć21: Operating buttons
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com