Basic Menu Operation
DG2030 User Manual
2Ć25
Knob Icon
Cursor Window
Width Window
Cursor Window Value
Point Cursor
Area Cursor
Scope
Width Window Value
Figure 2Ć18: Area and Point cursors
The area cursor is used to select a range of signal data, such as during a copy
operation. In this operation, the data in the area specified by the area cursor is
copied to the edit buffer memory. The paste operation is an example where the
point cursor is used. In this operation, data that was previously loaded into the
edit buffer memory is copied into pattern memory at the point specified by the
point cursor.
The area cursor’s area is determined by a combination of an area origin (as
defined by a data group and a sample point position), the number of points
(which corresponds to the width of the area) and the scope (which corresponds to
the height of the area). The origin data group is set with the up and down arrow
buttons. The area cursor origin sample point is displayed in the Cursor window
at the upper left of the screen in the same way as the point cursor is displayed,
and can be manipulated in the same way as the point cursor.
The width of the area cursor is displayed in the Width window, and can be set
with the general purpose knob or numeric keys when the knob icon has been
moved to the Width window using the CURSOR button. Use the EDIT
!
Execute Action
!
Set Scope item to set the area cursor height.
The position of the point cursor is determined by a data group and a sample
point. The data group is set with the vertical arrow buttons. The sample point
position is displayed in the Cursor window at the upper left of the screen. It can
be set with the general purpose knob or the numeric keys when the knob icon has
been moved to the Cursor window with the front panel CURSOR button.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
