Operating Examples
2Ć40
DG2030 User Manual
Example 3: Signal Output
Example 3 first groups the data bits from the pattern data created in example 2
and allocates each data bit to output channels. Next, this procedure sets all the
settings required for signal output and actually outputs the signals.
1. Assign DATA0 to DATA3 to a group called IC1.
a. Reset all bit allocations.
Menu button
Bottom button
Popup menu
Side button
Front panel
button
SETUP
Group Assign
Reset All bits
Assign
OK
b. Set the MSB (most significant bit) and LSB (least significant bit) to D3
and D0, respectively.
Menu button
Bottom button
Popup menu
Side button
Front panel
button
Select
4 DATA3
Group Bit(s)
Config
MSB
(Set D3)
LSB
(Set D0)
OK
NOTE
. The MSB setting may change depending on the direction the general
purpose knob is turned. If that happens, the MSB setting must be set again.
Grouping data bits
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com