manualshive.com logo in svg

Tektronix DG2030, User Manual

Share
Download
Tektronix DG2030 User Manual Download Page 61

Basic Menu Operation

2Ć26

DG2030 User Manual

Text Input

Text input is required to enter the names for data groups, data blocks, floppy disk
files, and other items. When such input is required, the instrument brings up the
dialog box shown in Figure 2-19.

Figure 2Ć19: Text input menu

The text input menu displays a default string for the item. Use the side menu
Clear String button to erase this default string. Use the arrow buttons or the
general purpose knob to move the reverse-video cursor to the desired character in
the letter/digit matrix, and pressing the EXECUTE button. Incorrect input can
be erased with the delete key. The position where the character is inserted is
indicated with an underscore. Use the left and right arrow buttons to change the
position of the underscore. When all required characters have all been selected,
press the OK button on the side menu to complete the operation. To cancel text
input and return to the previous menu, press Cancel on the side menu.

Popup Message Box

The instrument displays a message box that prompts you to confirm operations
that would be difficult to recover. Figure 2-20 shows the file deletion confirma-
tion message box. Press the side menu OK button to execute the operation
displayed in the box. Press Cancel to cancel the operation and return to the state
prior to selecting the current menu.

Figure 2Ć20: Popup message box

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for DG2030







































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands