Appendix A: Specifications
AĆ14
DG2030 User Manual
Table AĆ8: Certifications and compliances (cont.)
Category
Standards or description
Pollution Degree
A measure of the contaminates that could occur in the environment around and within a product.
Typically the internal environment inside a product is considered to be the same as the external.
Products should be used only in the environment for which they are rated.
Pollution Degree 2
Normally only dry, nonconductive pollution occurs. Occasionally a
temporary conductivity that is caused by condensation must be
expected. Thislocation isa typical office/home environment.
Temporary condensation occursonly when the product isout of
service.
Conditionsof Approval
Safety Certifications/Compliances are made for the following conditions:
Altitude (maximum operation): 2000 meters
IEC Characteristics
Equipment type:
Test and Measuring
Installation Category II (as defined in IEC 61010-1, Annex J)
Pollution Degree 2 (asdefined in IEC 61010-1)
Safety ClassI (asdefined in IEC 61010-1, Annex H)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com