Edit Menu
3Ć8
DG2030 User Manual
Table 3Ć2: Edit menu display
Screen
Reference
Function
Page
1
Displays the point position of the cursor pointer, and the time
from the start of the data. When the knob icon is displayed at
the left edge, the cursor can be moved with the general
purpose knob.
2
The block name. Also the adjacent area is used to display the
position of the current block with respect to the total number of
blocks. There is only one block in the example shown in the
figure, and currently the block UNNAMED isbeing displayed.
3
Displays a
M
to mark the position of the reference.
3Ć19
4
The cursor
5
Displays the memory size of the block at the cursor position.
3Ć20
6
Displays the difference between the reference mark (3) and the
cursor asa number of pointsand also asa time.
7
Displays the position of the reference mark (3) as a point value
and asa time.
8
The area cursor. The area enclosed by this cursor is the object
of the execute action editing operations. The area is set by the
Set scope
(vertical) in the
Execute Action
menu and
Width
(horizontal) items.
9
Displays the time per point.
10
Displays the total memory size for all blocks.
11
Displays the size of the remaining available memory.
12
A scale which shows point positions.
13
Display area for the pattern data.
14
Describes the current action of the arrow buttons.
3Ć21
15
Displays the value of the data at the cursor position (4).
16
Displaysthe number of bitsin the data bit group.
17
Describes the function of the front panel
EXECUTE
button.
Pressing the
EXECUTE
button executesthe editing function for
the indicated cursor position or area.
3Ć29
18
Indicatesthe data bitsor the data bit groups. Data bitsthat are
set up to be the object of editing operations are displayed at a
higher intensity (bright).
19
Displaysthe width of the area cursor asa number of pointsand
asa time.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com