Setup Menu
DG2030 User Manual
3Ć75
The delay can be adjusted set in the range –5.0 ns to 18.0 ns in 0.02 ns steps for
each output.
Operation.
Set the output delay
Bottom button
Popup menu
Side button
Timing Condition
Select the channel for which the rise time is to be set using the knob.
Delay
(the delay setting)
Run Mode Menu
This menu sets the run mode used to output pattern data, and sets the pattern data
output update method used when data is changed.
Operation.
Set the run mode
Bottom button
Popup menu
Side button
Run Mode
Select the run mode
(Repeat, Single, Step,
or Enhanced)
Pattern data is iteratively output. When no sequence is defined, all of the pattern
data is output iteratively as a single pattern as shown in Figure 3-56. If a
sequence is defined, the sequence ordering and repeat (Repeat Count) functions
are applied. The extended sequence functions (trigger input, event jump, etc.) are
ignored as shown in Figure 3-57.
Pattern Data
Pattern Data Output
Pattern Data
Figure 3Ć56: Repeat Mode pattern data output (when no sequence is defined)
Delay
Repeat
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
