Operating Examples
2Ć46
DG2030 User Manual
The rise time and fall time of each output signal can be varied within a certain
range.
7. Set the rise time for the output channel CH0 to CH3 to 5 ns and fall time for
those channels to FAST. See Figure 2-27.
Menu button
Bottom button
Popup menu
Side button
Front panel
button
Timing Condition
Select channel
CH0
by pressing the front panel up and down arrow buttons.
Rise
5
ENTER
Fall
0
ENTER
Set the rise and fall times for channels
CH1
to
CH3
in the same manner.
Slopesfor the rise and fall periods
can be set within the ranges
indicated by the nonĆhighlighted
lines. As a slope, FAST or a value
from the range can be selected.
Figure 2Ć27: Rise /fall time settings
Setting Rise/Fall Timing
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com