Edit Menu
3Ć10
DG2030 User Manual
Operation.
Save the pattern data and setup parameters
Bottom button
Popup menu
Side button
Insert a writeĆenabled floppy disk in the floppy disk drive.
File
Save Data & Setup
Enter the file name for the data to be saved.
OK
Loads pattern data from mass memory (floppy disk) into pattern memory.
The DG2030 can read the following data formats:
H
Tektronix TDS series waveform data (file extension: .WFM)
H
Tektronix TLS series group data (file extension: .GRP)
H
Tektronix AWG2000 series waveform data (file extension: .WFM)
H
Tektronix DG2020 and DG2030 waveform data (file extension: .PDA)
H
CSV format data (file extension: .CSV). A procedure for formatting data in a
CSV format is on page 3-14.
Popup menu parameter settings are used to specify the read-in method.
Operation.
Import pattern data from mass memory.
Bottom button
Popup menu
Side button
Insert the floppy disk in the drive.
File
Import Data
Select the file to be read in.
OK
Change the parametersasrequired.
OK
Popup Menu.
Figure 3-4 shows the data read-in configuration window. The
parameters that appear in this window differ depending on the data format being
read in.
Import
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
