Operating Examples
2Ć58
DG2030 User Manual
Do the following three steps to create the sequence.
13. Create line 0 and line 1 in the sequence.
Menu button
Bottom button
Popup menu
Side button
Front panel
button
Insert
Select the SUB1 from the Select block and SubĆsequence popup menu using the front
panel knob.
OK
Set Enhanced
Control
Trig Wait
(Set to On)
Go Back
With the front panel down arrow button, advance the line pointer to the next line.
Using above procedures, insert SUB1 into the line 1 and set the Trig Wait.
14. Create line 2 and line 3. Note that you can not set the jump address (line
number) that has not been created. The jump condition is set in step
Menu button
Bottom button
Popup menu
Side button
Front panel
button
Insert
Select the BK1 from the Select block and SubĆsequence popup menu using the front
panel knob.
OK
Set Enhanced
Control
Repeat Count
(Set to Infinite)
Go Back
With the front panel down arrow button, advance the line pointer to the next line.
Using above procedures, insert BK4 into the line 3.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com