Utility Menu
3Ć96
DG2030 User Manual
Sets the baud rate, data length for transmitted data, parity, number of stop bit,
and flow control method for the serial port. These parameters are set to match the
settings of the connected external controller for remote control or printer for
hardcopy.
Base Menu
Item
Function
Baudrate
Sets the transmission rate for the serial port. A transmission rate of
300, 600, 1200, 2400, 4800, 9600, or 19200 can be set.
Data Bits
Setsthe data length for the transmitted data. A data length of 7 or 8
bitscan be set.
Parity
Setsthe kind of parity bit attached to transmitted data. The parity can
be set to None, Even, or Odd.
Stop Bits
Sets the number of stop bits. 1 or 2 stop bits can be set.
Handshake
Setsthe flow control method. Either Off, Soft, or Hard can be set for
the flow control.
Operation.
Set the serial interface parameters
Bottom button
Popup menu
Side button
System
Select the Serial parameter with the up and
down arrow buttons.
Select the item with the left and right arrow
buttons.
Sets whether or not the instrument should wait for key input before starting
operation in the event a diagnostics error was detected at start up. This setting is
useful in cases where, for example, you do not want the system waiting for key
input.
Operation.
Set the power-on pause
Bottom button
Popup menu
Side button
System
Select Power up Pause with the up and down
arrow buttons.
Select On with the left and right arrow buttons.
Serial
Power up Pause
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com