DG2030 User Manual
2Ć31
Operating Examples
This chapter describes DG2030 operating procedures from pattern signal creation
through output by presenting simple examples. Following these procedures is a
good way for new users to get an overview of the instrument’s operation. This
section presents the following four sample procedures.
1. Creating a Pattern and Storing into a File
2. Loading and Editing a Pattern Stored in a File
3. Setting up Signal Output
4. Creating a Sequence
Refer to the menu descriptions in the Reference section for detailed explanations
of the menus and functions used in these procedures.
NOTE
. These examples do not cover all the features and functions of the
DG2030. They are intended only to introduce the operations required to execute
the instrument’s basic functions.
Required Equipment
The following equipment is required for examples 1 through 4.
H
An IBM-formatted floppy disk (2HD, 1.44 MB)
H
A digital storage oscilloscope (A Tektronix TDS-Series oscilloscope or
equivalent)
H
Two BNC cables
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com