Edit Menu
3Ć32
DG2030 User Manual
Operation.
Set the scope
Bottom button
Popup menu
Side button
Execute Action
Select Set scope.
OK
Set the number of scope elements using the
knob.
OK
The cursor becomes the area cursor. The data in the editing range is deleted, and
data is filled in at the end of memory in an amount equal to the amount of data
deleted. The filled data (the tail) is set to 0. Note that the deleted data is inserted
in the paste buffer and can be used as paste data.
Area Cursor
Tail
Before
Execution
After
Execution
Figure 3Ć19: Cut
The cursor becomes the area cursor. The data in the editing range is copied to the
paste buffer. The pattern data itself is not affected.
Inserts the data in the paste buffer at the current cursor position. The data after
the cursor is moved to the rear by the length of the pasted data. After the data is
moved, data that exceeds the set memory size is lost.
Cursor
Before
Execution
After
Execution
Paste Buffer Data
Figure 3Ć20: Paste - insert
Cut
Copy
PasteĆinsert
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com