Setup Menu
3Ć68
DG2030 User Manual
Changes the name of the group selected with the cursor.
Operation.
Rename a group
Bottom button
Popup menu
Side button
Group Assign
Select the group whose name is to be
changed.
Rename
Input a new name.
OK
Changes the bit configuration of the group selected with the cursor. If the result
of the changed configuration overlaps an existing group, the newly defined group
takes precedence.
Operation.
Change a group’s bit configuration
Bottom button
Popup menu
Side button
Group Assign
Group Bit(s) Config
MSB
(Specify the MSB)
LSB
(Specify the LSB)
OK
Deletes the currently defined group definitions and returns the group settings to
the initial state. (See Appendix C.)
Operation.
Delete a group definition
Bottom button
Popup menu
Side button
Group Assign
Reset All bits
Assign
OK
Output Condition Menu
This menu defines which data bits are assigned to which output channel. The
menu lists the data bits at the right and the output channels at the left (see Figure
3-53). Use the general purpose knob to select data bits and the up and down
arrow buttons to select output channels.
Rename
Group Bit(s) Config
Reset All bits Assign
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com