Kirisun PT6800, Service Manual

Page: 1 / 42

PT6800 Service Manual
Dangerous!
Do not connect the AC power or DC power over 8.6V with
any connector or terminal of the radio. Otherwise it will cause
fire, electric shock or damage to the radio.
Warning!
Do not reverse power connection.
It may cause harm to the radio if signal input on the antenna
connector is larger than 20 dBm (100mW).
Do not turn on the radio before the antenna or load
connection is completed.
If the antenna has been damaged, do not use the radio.
Damaged antenna may cause light burning on skin.
Though the radio is waterproof, it's better to avoid putting it
in rain or snow, or any other liquid to ensure its life and
performance.
Statement!
Kirisun Electronics (Shenzhen) Co., Ltd owns the copyright
of KSP6800 software.
Unauthorized duplication of KSP6800 software is strictly
prohibited.
Kirisun Electronics (Shenzhen) Co., Ltd owns the copyright
of the MCU software.
Kirisun Electronics (Shenzhen) Co., Ltd owns the copyright
of the radio outward appearance/structure/circuit design.
Kirisun Electronics (Shenzhen) Co., Ltd owns the copyright
of this service manual. Unauthorized publication is prohibited.
Kirisun Electronics (Shenzhen) Co., Ltd owns the
trademarks “KIRISUN”, “ ”, and “
科立讯
”.
Contents
Chapter 1 Overview.......................................................................................... 1
Chapter 2 External View and Functional Keys ................................................ 1
Chapter 3 Mode Introduction ........................................................................... 2
Chapter 4 Circuit Description........................................................................... 3
Chapter 5 Function Description and Parameter Setting ................................... 8
Chapter 6 Disassembly for Repair.................................................................. 10
Chapter 7 Adjustment ..................................................................................... 12
Chapter 8 Specifications................................................................................. 16
Chapter 9 Servicing and Testing Equipment .................................................. 16
Chapter 10 Troubleshooting ........................................................................... 16
Appendix 1 Abbreviations .............................................................................. 17
Appendix 2 Electronic Parts List.................................................................... 17
Appendix 3 Structural Parts List .................................................................... 23
Appendix 4 Accessories.................................................................................. 24
Figure 1 PT6800 Block Diagram ................................................................... 25
Figure 2 PT6800 Main Board Schematic Circuit Diagram............................ 26
Figure 3 PT6800 Main Board Top Layer Position Mark Diagram ................ 27
Figure 4 PT6800 Main Board Bottom Layer Position Mark Diagram .......... 28
Figure 5 PT6800 Main Board Top Layer Position Value Diagram................ 29
Figure 6 PT6800 Main Board Bottom Layer Position Value Diagram.......... 30
Figure 7 PT6800 Key Board Schematic Circuit Diagram.............................. 31
Figure 8 PT6800 Key Board Top Layer Position Mark Diagram .................. 32
Figure 9 PT6800 Key Board Bottom Layer Position Mark Diagram ............ 33
Figure 10 PT6800 Key Board Top Layer Position Value Diagram................ 34
Figure 11 PT6800 Key Board Bottom Layer Position Value Diagram.......... 35
Figure 12 PT6800 PTT Board Schematic Circuit Diagram ........................... 36
Figure 13 PT6800 PTT Board Top Layer Position Mark Diagram................ 37
Figure 14 PT6800 PTT Board Bottom Layer Position Mark Diagram.......... 37
Figure 15 KB-36C Schematic Circuit Diagram ............................................. 38
Figure 16 KBC-60Q Schematic Circuit Diagram .......................................... 39
Figure 17 PCB Layout 1................................................................................. 40
Figure 18 PCB Layout 2................................................................................. 41