Symmetricom SDU-2000, User Manual

Page: 303 / 470

12713020-002-2 Revision D – April 2004 SSU-2000 User’s Guide 303
TL1 Command Interface
RTRV-STATUS-OUTPUT:[tid]:
[aid]:ctag;
Valid aid code:
ALL
,
SxAy[-z]
This command returns the condition (current operating mode
and status) of an output module or port.
The format of each port response line is:
^^^"aid:mstat,red,clksrc,pql,pstate" <cr lf>
where:
The first line contains the port aid.
mstat
= module status [OK|DIS|FLT]: where OK indicates
normal operation, and DIS or FLT indicate all outputs are
turned off
red
= redundant [NA|SxAy]: where NA = non-redundant,
and the aid = the redundant module identifier
clksrc
= clock which is generating the output:
[CLK-A|CLK-B|CLK-C|CLK-D]
pql
= possible Priority Quality Level (SSM) being generated
pstate
= port status [1|0|F], where 1 = enabled, 0 =
disabled, and F= faulted
Multiple message lines are returned if aid specifies one or
more output modules as follows:
^^^"aid:mstat,red,clksrc,pql" <cr lf>
^^^”aid:p1,p2,p3,…p20” <cr lf>
where:
The first line contains the module aid.
mstat
= module status is [OK|DIS|FLT], where OK = normal
operation, and DIS or FLT = all outputs are turned off
red
= [NA|SxAy], where: NA = non-redundant, and SxAy
= redundant module aid
clksrc
= clock generating the output: [CLK-A |CLK-B
|CLK-C |CLK-D]
pql
= Priority Quality Level (SSM) being generated
The second line contains:
aid
= module identifier
pstate
= port status: [1|0|F], where 1 = enabled, 2 =
disabled, F = faulted for all 20 outputs
RTRV-USER:[tid]::ctag;
Valid aid code: None
This command returns the current user list. The format of the
response message is:
^^^"username,level" <cr lf>
where:
username
= assigned user
level
= access level assigned to that user.
No password information is displayed. This command is only
accessible by Level 4 users.
Table B-5. TL1 Retrieve Commands (Continued)
Command Description