Suzuki 2009 LT-A500XP, Service Manual

Page: 336 / 624

2C-13 Rear Suspension:
2) Remove the rear suspension lower arm bushings (4)
along with the inner dust seals (5) with the special
tools.
Special tool
: 09923–73210 (Bearing remover)
: 09930–30104 (Rotor remover slide shaft)
3) Remove the another inner dust seal (6) with the
special tool.
Special tool
(A): 09943–88211 (Pinion bearing installer)
Installation
1) Install the rear lower arm bushings (1) and inner dust
seals (2) with the special tool and suitable socket.
NOTE
Position the bushings and dust seals by
referring to “Rear Suspension Assembly
Construction (Page 2C-2)”.
CAUTION
!
The removed bushings and dust seals must
be replaced with new ones.
Special tool
(A): 09941–34513 (Bearing installer)
(B): 09924–84510 (Bearing installer set)
2) Apply grease to the lip of inner dust seals, spacer (3)
and inside of dust seals (4).
: Grease 99000–25160 (Water resistance
grease or equivalent)
3) Install the spacer (3), dust seals (4) and washers (5).
5
4
I931H1230038-01
6
(A)
I931H1230039-01
1
(A)
(A)
(B)
I931H1230040-01
2
(A)
(A)
(B)
2
(A)
(A)
(B)
I931H1230041-01
3 3
5
5
5
4
4
4
I931H1230058-01