Suzuki 2009 LT-A500XP, Service Manual

Page: 497 / 624

Automatic Transmission: 5A-13
• Install the spring (8) and spring plate (9) by aligning
the spring ends with the holes.
NOTE
When installing the spring (8), set the paint
mark side of the spring (8) to the movable
driven face side.
• Compress the spring (8) with the special tool.
Special tool
(B): 09922–31430 (Clutch spring
compressor)
NOTE
Make sure to insert the spring end “A” into
the slot “B” of the special tool as shown in
the figure.
• Tighten the movable driven face ring nut (10)
temporarily.
• Remove the special tool from the movable driven face
assembly.
• Tighten the movable driven face ring nut (10) to the
specified torque with the special tools.
Tightening torque
Movable driven face ring nut (a): 110 N·m (11.0
kgf-m, 79.5 lbf-ft)
Special tool
(C): 09917–23711 (Ring nut socket wrench)
(D): 09924–52450 (Fixed driven face holder)
8
9
8
I931H1510044-01
(B)
8
I931H1510045-01
“A”
“B”
I931H1510046-01
10
(B)
I831G1510049-01
(a)
10
(C)
(D)
I931H1510048-01