Suzuki 2009 LT-A500XP, Service Manual

Page: 248 / 624

1F-16 Engine Cooling System:
6) Apply silicone grease to the mechanical seal ring (2).
: Grease 99000–25100 (SUZUKI SILICONE
GREASE or equivalent)
7) Apply molybdenum solution to the impeller shaft.
M/O: Molybdenum oil (MOLYBDENUM OIL
SOLUTION)
8) Install the impeller shaft to the water pump body.
9) Install the washer (3) and pin (4) to the impeller
shaft.
10) Install the cap (5) and E-ring (6).
11) Install a new O-ring (7) and apply engine coolant to
it.
CAUTION
!
Use a new O-ring to prevent engine coolant
leakage.
12) Fit the water pump cover and tighten the water pump
cover screws (8) to the specified torque.
Tightening torque
Water pump cover screw (a): 5.5 N·m (0.55 kgf-
m, 4.0 lbf-ft)
2
I931H1160047-01
3
4
I931H1160054-01
5
6
I931H1160055-01
7
I931H1160048-02
(a)
8
(a)
8
I931H1160049-02