Suzuki 2009 LT-A500XP, Service Manual

Page: 217 / 624

Engine Mechanical: 1D-69
Tightening Torque Specifications
B931H21407002
NOTE
The specified tightening torque is described in the following.
“Air Cleaner Inlet Sheet Construction (Page 1D-6)”
“Throttle Body Components (Page 1D-8)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List: in Section 0C” .
Fastening part
Tightening torque
Note
N
⋅
m kgf-m lbf-ft
Air cleaner box mounting bolt 4.5 0.45 3.0
)
(Page 1D-7)
ISC valve mounting screw 2 0.2 1.5
)
(Page 1D-12)
Fuel delivery pipe mounting screw 5 0.5 3.5
)
(Page 1D-13)
Engine mounting nut 60 6.0 43.5
)
(Page 1D-17)
Engine mounting damper stopper bolt
23 2.3 16.5
)
(Page 1D-17) /
)
(Page 1D-29)
Cylinder head bolt (M10) (Initial) 25 2.5 18.0
)
(Page 1D-25)
Cylinder base head bolt (M10) (Final) 37 3.7 27.0
)
(Page 1D-25)
Cylinder head bolt (M8) 25 2.5 18.0
)
(Page 1D-25)
Cylinder head nut 25 2.5 18.0
)
(Page 1D-25)
Camshaft sprocket bolt 15 1.5 11.0
)
(Page 1D-26)
Cylinder head cover bolt
10 1.0 7.0
)
(Page 1D-27) /
)
(Page 1D-30)
Valve clearance inspection cap bolt 10 1.0 7.0
)
(Page 1D-27)
Cam chain tension adjuster mounting bolt 10 1.0 7.0
)
(Page 1D-28)
Cam chain tension adjuster cap bolt 8 0.8 6.0
)
(Page 1D-28)
TDC plug 23 2.3 16.5
)
(Page 1D-28)
Rocker arm shaft bolt 28 2.8 20
)
(Page 1D-37)
Water bypass union 12 1.2 8.5
)
(Page 1D-40)
Intake pipe bolt 9 0.9 6.5
)
(Page 1D-40)
Cam chain tensioner bolt 13 1.3 9.5
)
(Page 1D-41)
Crankcase bolt (M6) 10 1.0 7.0
)
(Page 1D-54)
Crankcase bolt (M8) 26 2.6 19.0
)
(Page 1D-54)
Crank balancer drive gear nut 150 15.0 108.5
)
(Page 1D-55)
Crank balancer driven gear bolt 50 5.0 36.0
)
(Page 1D-57)
Left crankshaft spacer nut 38 3.8 27.5
)
(Page 1D-59)
Water pump mounting bolt 10 1.0 7.0
)
(Page 1D-59)