Maintenance and Lubrication: 0B-12
Final Gear Oil Inspection
B931H20206011
Inspect final gear oil
Every 2 000 km (1 200 miles, 6 months)
1) Place the vehicle on a level ground.
2) Remove the filler plug (1), and inspect the oil level. If
the oil level is below, add fresh oil until the oil level
reaches the bottom tip of the thread.
3) Tighten the oil filler plug (1) securely.
Final Gear Oil Replacement
B931H20206012
Replace final gear oil
Every year
1) Place the vehicle on a level ground.
2) Remove the rear under cover. Refer to
“Under
Cover Removal and Installation: in Section 9D”
.
3) Place an oil pan below the final gear case.
4) Drain oil by removing the oil drain plug (1) and oil
filler plug (2).
5) Tighten the oil drain plug (1) to the specified torque,
and pour fresh oil through the oil filler hole until the
oil level reaches the bottom tip of the thread. Use
Mobil fluid 424 or equivalent oil.
Final gear oil capacity
770 ml (26.0/27.1 US/lmp oz)
CAUTION
!
Replace the gasket with a new one.
Tightening torque
Final gear oil drain plug (a): 23 N·m (2.3 kgf-m,
16.5 lbf-ft)
1
I931H1020026-01
I931H1020027-02
1
2
I931H1020029-01
(a)
1
I931H1020028-01
Summary of Contents for 2009 LT-A500XP
