Suzuki 2009 LT-A500XP, Service Manual

Page: 214 / 624

1D-66 Engine Mechanical:
2) Apply thread lock to the bearing retainer screws and
tighten them.
: Thread lock cement 99000–32030
(THREAD LOCK CEMENT SUPER 1303 or
equivalent)
3) Install the crankshaft oil seal No. 1 (2) with the
special tool.
NOTE
The plate side of the crankshaft oil seal No. 1
(2) inside of the crankcase.
Special tool
(A): 09913–70210 (Bearing installer set (10
– 75))
4) Apply grease to the lip of oil seal (2).
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
5) Install the crankshaft oil seal No. 2 (3) with the
special tool.
NOTE
The plate side of the crankshaft oil seal No. 2
(3) faces outside of the crankcase.
Special tool
(A): 09913–70210 (Bearing installer set (10
– 75))
6) Apply grease to the lip of oil seal (3).
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
7) Install the snap ring (4).
8) Install the driveshaft spacer oil seal (5) with the
special tool.
Special tool
(A): 09913–70210 (Bearing installer set (10
– 75))
9) Apply grease to the lip of oil seal (5).
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
I931H1140277-01
(A)
2
2
I931H1140278-02
(A)
3
3
I931H1140279-02
4
I931H1140280-01
(A)
5
5
I931H1140281-02