Sirona SIM MODULAR Operating Instructions Manual Download Page 144

Page: 144 / 218

65 64 020 D3650

144

D3650

201.01.02

02 04.2016

4 Operation

Sirona Dental Systems GmbH

4.11 Configurating the simulation unit (setup)

Operating Instructions Simulation Unit SIM MODULAR

4.11.2.3.8

Adjusting the cleaning agent mixture for chemical suction hose

cleaning

The suction system is automatically cleaned by water pumped into a tank

behind the receptacle of the suction hoses and extracting it from there. A

cleaning agent is added to the water if the simulation unit is equipped with

the chemical suction hose cleaning option. For more information, see the

section “Suction hose cleaning with “suction hose cleaning” option

[ → 173].”
It is possible to set how much cleaning agent should be added to the

water for chemical suction hose cleaning. The quantity is dependent on

the cleaning agent used. Please follow the manufacturer’s instructions for

the cleaning agent.
➢ Use the – and + keys to adjust the cleaning agent mixture for

chemical suction hose cleaning (0 to 5%).



The adjusted percentage is displayed on the touchscreen.

3 %

chem

Summary of Contents for SIM MODULAR



























































































































































































































Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands

Sirona SIM MODULAR, Operating Instructions Manual

Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands