Sirona SIM MODULAR Operating Instructions Manual Download Page 127

Page: 127 / 218

65 64 020 D3650

D3650

201.01.02

02 04.2016

127

Sirona Dental Systems GmbH

4 Operation

Operating Instructions Simulation Unit SIM MODULAR

4.9 SIVISION digital video system

båÖäáëÜ

Generating a still image

✔

The live image is displayed on the SIVISION monitor.

1. Step on the foot pedal.



The display switches from live to still image.

2. Press the foot pedal again.



The live image is again displayed on the SIVISION monitor.

If the simulation unit is equipped with the C+ electronic foot control, it can

be configured in the setup that the camera image can be focused with the

foot control, see "Switching on/off the C+ electronic foot control function

for intraoral camera focus" for EasyPad, for EasyTouch. If this function is

switched on, the foot pedal must be pressed down fully to switch between

live and still images.

Saving an image

✔

The patient must be registered in SIDEXIS.

✔

The still image to be saved is displayed on the SIVISION monitor.

➢ Press the left button of the C+ electronic foot control or press the

Endodontics / Purge

key on the EasyPad.



An acoustic signal sounds. The still image is displayed in an
additional SIDEXIS window and saved in the patient database.

Purge

Summary of Contents for SIM MODULAR



























































































































































































































Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands

Sirona SIM MODULAR, Operating Instructions Manual

Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands