Sirona SIM MODULAR Operating Instructions Manual Download Page 41

Page: 41 / 218

65 64 020 D3650

D3650

201.01.02

02 04.2016

Sirona Dental Systems GmbH

4 Operation

Operating Instructions Simulation Unit SIM MODULAR

4.1 Putting the simulation unit into operation

båÖäáëÜ

Operation

4.1

Putting the simulation unit into operation

4.1.1

Initial Operation

Switch on the main switch (I).
The display on the dentist element lights up.

Electric height and tilt adjustment

Adjusting the height

The patient simulation can be moved up and down using buttons (A) and

(B) on the user interface on the dentist element or using the 4-way foot

switch.

Adjusting the inclination and rotation

1. Release the clamping lever.
2. Move the patient simulator to the desired position.
3. Tighten the clamping lever.

CAUTION

For safety reasons, always switch the SIM MODULAR simulation

workstation off (O) after completing work.

CAUTION

Risk of getting crushed/trapped!
When adjusting the height, it is very important to ensure that there are

no people or objects in the immediate vicinity of the patient simulator!

IMPORTANT

If the facility for adjusting the height of the patient simulator gets stuck

in the end position and will not move in the opposite direction, you

should immediately contact an after-sales service organization that has

been approved by Sirona.

Summary of Contents for SIM MODULAR



























































































































































































































Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands

Sirona SIM MODULAR, Operating Instructions Manual

Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands