Sirona SIM MODULAR Operating Instructions Manual Download Page 92

Page: 92 / 218

65 64 020 D3650

D3650

201.01.02

02 04.2016

4 Operation

Sirona Dental Systems GmbH

4.5 Dentist element

Operating Instructions Simulation Unit SIM MODULAR

Switching endodontics mode on

The intensity of the endodontics function is limited for safety reasons,

e.g., in order to prevent broken needles.

Ultrasonic handpiece, Endo intensity values

✔

The SIROSONIC L scaler is removed.

✔

The ultrasonic intensity setting (ultrasonic mode) is shown on the

EasyPad display.

1. Press the

Endodontics / Purge

key.



The endodontics intensity (endo mode) is displayed instead of
ultrasonic intensity (ultrasonic mode).

2. Use favorite keys 1 and 3 to set the desired endodontics intensity

(En 1 to En 5).

By pressing the

Endodontics / Purge

key again, the user is returned to

ultrasonic mode.
The intensity settings cannot be saved on the favorite keys in endo mode.

IMPORTANT

Intensities in endodontics mode
The intensity can be set from 1e to 5e. Please note that the intensity

values of 1e to 5e (endodontics mode) do not correspond with the

values of 1 to 5 in the scaler mode (ultrasound mode).
Always use the endo mode for endodontics!

Purge

Setup

Summary of Contents for SIM MODULAR



























































































































































































































Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands

Sirona SIM MODULAR, Operating Instructions Manual

Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands