Sirona SIM MODULAR Operating Instructions Manual Download Page 187

Page: 187 / 218

65 64 020 D3650

D3650

201.01.02

02 04.2016

187

Sirona Dental Systems GmbH

5 Care, cleaning and maintenance by the user

Operating Instructions Simulation Unit SIM MODULAR

5.8 Empty the sediment container

båÖäáëÜ

Installing the sediment container

1. Lubricate the O-ring C on the sediment container. Lubricants, see

"Care, cleaning, and disinfecting agents." [ → 148]

2. Hold the sediment container C so that the latches of the bayonet

catch are positioned transverse to the supply module. Rotate the

sediment container C clockwise.



The sediment container is locked in place.

3. Install the protective ground wire B and side cover A.



The simulation unit is ready for operation again.

Summary of Contents for SIM MODULAR



























































































































































































































Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands

Sirona SIM MODULAR, Operating Instructions Manual

Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands