Sirona SIM MODULAR Operating Instructions Manual Download Page 42

Page: 42 / 218

65 64 020 D3650

D3650

201.01.02

02 04.2016

4 Operation

Sirona Dental Systems GmbH

4.1 Putting the simulation unit into operation

Operating Instructions Simulation Unit SIM MODULAR

Manual height and inclination adjustment

Adjusting the height

Press the foot pedal to manually move the patient simulator up and down.

Adjusting the rotation

1. Release the rotation clamping lever.
2. Move the patient simulator to the desired position.
3. Tighten the clamping lever.

Adjusting the inclination

1. Release the clamping lever.
2. Move the patient simulator to the desired position.
3. Tighten the clamping lever.

Summary of Contents for SIM MODULAR



























































































































































































































Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands

Sirona SIM MODULAR, Operating Instructions Manual

Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands