Sirona SIM MODULAR Operating Instructions Manual Download Page 94

Page: 94 / 218

65 64 020 D3650

D3650

201.01.02

02 04.2016

4 Operation

Sirona Dental Systems GmbH

4.5 Dentist element

Operating Instructions Simulation Unit SIM MODULAR

Switching on the endodontics function

The intensity of the endodontics function is limited for safety reasons,

e.g., in order to prevent broken needles.

Ultrasonic handpiece, Endo intensity values

✔

The SIROSONIC L scaler is removed.

✔

The

Ultrasonic dialog

is displayed on the touchscreen.

➢ Touch the

Endo

key.



The key is highlighted orange. In the ultrasonic dialog, the
endodontics intensity is displayed instead of the ultrasonic

intensity.

IMPORTANT

Endo intensity values
The intensity can be adjusted from 1e to 5e. Please note that the

endodontics intensity values of 1e to 5e do not match the values of 1 to

5 in the calculus removal mode.
Always use the endo function for endodontics!

10:45:03

Endo

100

Set

Endo

10:45:03

Endo

Summary of Contents for SIM MODULAR



























































































































































































































Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands

Sirona SIM MODULAR, Operating Instructions Manual

Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands