Sirona SIM MODULAR Operating Instructions Manual Download Page 11

Page: 11 / 218

65 64 020 D3650

D3650

201.01.02

02 04.2016

Sirona Dental Systems GmbH

1 General Information

Operating Instructions Simulation Unit SIM MODULAR

1.4 Intended use

båÖäáëÜ

1.4

Intended use

The simulation workstation is used for the training and education of dental

students, as well as for continuing education at universities, clinics, and

training institutes. It is a laboratory workstation that may not be used to

treat living persons. Before each use, the user must ensure that the units

are functionally reliable and in good condition.
To prevent injuries or damage due to improper use, the product may only

be operated in accordance with the manufacturer’s operating

instructions.
If the unit is not used in accordance with the operating instructions, this

may have a negative effect on the recommended protective measures.
This device is not intended for operation in areas subject to explosion

hazards and only allowed for indoor use.

1.5

Formats and symbols used

The formats and symbols used in this document have the following

meaning:

CAUTION

Follow the instructions!
If the instructions for operating the unit described in this document are

not observed, the intended protection of the user may be impaired.

Prerequisite

1. First action step
2. Second action step
or

➢

Alternative action

Result

➢ Individual action step

Prompts you to do something.

See "Formats and symbols

used [ → 11]"

Identifies a reference to another text

passage and specifies its page

number.

● List

Designates a list.

"Command / menu item"

Indicates commands, menu items or

quotations.

Summary of Contents for SIM MODULAR



























































































































































































































Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands

Sirona SIM MODULAR, Operating Instructions Manual

Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands