Sirona SIM MODULAR Operating Instructions Manual Download Page 165

Page: 165 / 218

65 64 020 D3650

D3650

201.01.02

02 04.2016

165

Sirona Dental Systems GmbH

5 Care, cleaning and maintenance by the user

Operating Instructions Simulation Unit SIM MODULAR

5.3 Instruments and instrument hoses

båÖäáëÜ

5.3.3.2

Autopurge function on the EasyTouch

Opening the autopurge dialog

✔

All instruments are in their holders.

✔

The

Start dialog

is displayed on the touchscreen.

1. Press the

Sub-dialog

fixed key.



The

Start

sub-dialog is displayed.

2. Touch the

Autopurge function

key.

Error message: Deposit instruments

If the

Deposit instruments

display appears after the autopurge function

has been started, the simulation unit has detected that not all of the

instruments have been placed in their holders.
➢ Check the instruments marked with a warning triangle on the

touchscreen.



When all of the instruments have been deposited, the autopurge
program will continue.

Setting the instrument purge time and starting the autopurge function

The purging time of the instruments may be set between 60 and 180

seconds.

✔

The

Autopurge

dialog is displayed on the touchscreen.

1. Use the – and + keys to set the purging time.

2. Touch the

Start

key.

Setup

San

Aqua

Apex Dist

Auto

120 s

Start

Auto

Stop

120 s

Start

Auto

Start

Summary of Contents for SIM MODULAR



























































































































































































































Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands

Sirona SIM MODULAR, Operating Instructions Manual

Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands