Sirona SIM MODULAR Operating Instructions Manual Download Page 160

Page: 160 / 218

65 64 020 D3650

160

D3650

201.01.02

02 04.2016

5 Care, cleaning and maintenance by the user

Sirona Dental Systems GmbH

5.3 Instruments and instrument hoses

Operating Instructions Simulation Unit SIM MODULAR

5.3.3

Automatically purge water lines (autopurge function)

The autopurge function is available as an option on the SIM MODULAR

simulation unit.
The autopurge function enables automatic purging of all water-carrying

instruments in the dentist element, of the 3-way SPRAYVIT E syringe in

the dentist and assistant elements and of the tumbler filling.
All of the instruments inserted in the supply module will be purged when

the autopurge function is activated. If the instruments remain in the supply

module after the simulation unit is switched off, the purging process will

automatically be started again the next time the unit is switched on.
Execute the autopurge function:

● Before starting work
● At the end of the work day

It is also possible to purge individual instruments; see "Purging water

lines (purge function)".

Preparation

The following preparations must be made before you start purging the

water lines:
1. Set all burr drives and the SIROSONIC L scaler to the maximum

water flow rate. The water regulators under the instrument holder

must be turned counterclockwise.

2. Put all instruments in place.

IMPORTANT

The water flow rate to the instruments is not checked by the simulation

unit.
➢ Make sure that the maximum water flow rate is set for all

instruments to be purged.

Summary of Contents for SIM MODULAR



























































































































































































































Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands

Sirona SIM MODULAR, Operating Instructions Manual

Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands